Understanding how to drive an automatic car well

Understanding how to drive an automatic car well | It can be ensured that driving an automatic car is easier than driving a manual car. However, this does not mean that there are no things to consider. An automatic transmission is a type of transmission in vehicles that does not require the driver to be used to determine speed.

In other words, the automatic transmission ensures better operation. If you are behind the wheel, you only have to switch on the accelerator pedal and brake while driving. This is what makes cars with automatic transmissions so attractive to consumers. At the same time, it has a generally more expensive selling price.

The automatic transmission itself is actually not new, because its flagship has existed since 1904. However, there must be new consumers in this type of transition every year. Although it is easier to use, it still requires an understanding of how to use it in the right way. These include special circumstances such as climbing, getting out or traffic jams.

How to drive an automatic car

Learning how to drive an automatic car must be based on theories. One of them understands every position of the gear lever. This is usually marked with the letters P, R, N, D. In addition, some automatic cars also have additional positions 3, 2 and L.

Such examples can be found on popular Toyota cars such as the Avanza, Rush or Yaris. However, understanding the theory will certainly not be useful without being accompanied by practice.

Therefore, practicing driving a car directly is still necessary to improve skills. For recording, the exercise should be carried out in a safe place and not violate the rules.

In addition, try to always be accompanied by those who have more experience in driving automatic cars. Understand the meaning of letters and numbers in the Matic transfer lever

In the manual transmission, the driver sees only a series of numbers and the letter R on the gear lever. The situation is different with automatic cars, because the transmission lever is full of letters.

To better understand this, below is an explanation of each of its features, summarized from the Toyota Rush owner’s manual.

  • P (parking) = stop the car or start the engine
  • R (reversed) = backwards
  • N (neutral) = neutral
  • D (drive) = normal driving
  • 3 = engine brake position
  • 2 = overload motor braking mode
  • L (low) = maximum engine braking position

Operation of the automatic transmission

To drive from the fixed position of the car, the position of the transmission lever should be in the P. The driver must first apply the brakes before setting it to D. Position D, which is used more often while driving under normal conditions.

If you want to reverse, make sure the car stops perfectly first before turning the lever into R mode. The aim is to make the service life of the gearbox more durable. Meanwhile, the N transmission can be used when the car stops for a while, like a red light.

Their presence dilutes the brake pads so that they do not work hard to stabilize the wheels to move due to the drive of the engine, as is the case when the position of the crane is in the letter D.

How to operate a medical transmission?

Well, some automatic cars are also equipped with a tiptronic system. Its presence makes the feeling of driving an automatic car seem like a guide, but without the need for a clutch pedal.

Therefore, the tiptronic system allows the operator to increase or decrease the speed level when the crane position is in position D.
This type of system is often also present in the form of shift paddles, the presence of which can be found behind the circumference of the steering wheel.

How to drive an automatic car on a slope

For your information, the automatic transmission in modern cars is actually very intelligent at reading road conditions. Therefore, users usually simply rely on the position of the D-gear lever when traversing rough terrain.

For information, the automatic transmission, especially the traditional one, has several speed levels. Generally, there are 4 levels of entry-level cars.

The automatic transmission itself determines the required speed when driving over an incline. However, users can also choose the same speed level. Especially for automatic cars equipped with an option of 3, 2 and L gearbox as above.

No less important is the attention to the transition, when the car has to stop on the slope, and then run. This means that the driver must take his foot off the brake pedal before stepping on the accelerator.

Do not take too long to change the position of the legs, just in case the car is not reversing. Especially for cars that are not equipped with the function of height assistance.

How to drive an automatic car with a derivative

In cars with manual transmissions, drivers usually use engine brakes to maintain the vehicle’s speed on the downhill road. In addition, the discharge is steep and long. Engine brakes in manual cars can be achieved by gradually lowering the speed level.

Owners of cars with automatic transmissions can do the same. Provided the car is equipped with an option of 3, 2 and L gearbox or something like that.

Motorists can choose one of them according to the descent of the landing or the speed of the car. According to the Toyota Rush owner’s manual, the presence of such transmission options is intended for use on steep roads.

More precisely, it is about showing the effect of the engine brakes so that the car does not slip freely. In this way, the car can drive safer. Therefore, efforts to reduce speed do not depend solely on the brakes. The difference between a conventional transmission and a CVT transmission

In addition to understanding how to drive an automatic car, users should also know what type of automatic transmission is connected to their car.

There are two types of automatic transmissions that are very popular, are the traditional automatic transmission and the continuously variable transmission (CVT).

• Traditional automatic transmission

Traditional automatic transmissions use planetary gearboxes to regulate speed. The shift seems to be very fast, but it looks a bit harsh. However, one of the advantages of a conventional automatic transmission is the cheaper repair costs.

• CVT automatic transmission

The CVT automatic transmission relies on rollers and steel belts to adjust the speed. Among the features of the CVT automatic transmission is a very uniform displacement. However, repairing the CVT automatic transmission can cost more if it is not properly maintained.

Advantages and disadvantages of automatic vehicles

Here are the pros and cons of automatic cars in general compared to manual cars.

Pros

  • More practical and easier to use
  • Smoother driving experience
  • Does not make the legs sore quickly
  • Suitable for use in crowded urban areas
  • Can accelerate faster

Cons

  • Fuel consumption tends to be more wasteful
  • The new price is definitely more expensive
  • Potentially lower selling price
  • More expensive maintenance costs

Conclusion

This is a review of how to drive an automatic car, along with important things owners need to know, especially those who are still beginners. Cars with automatic transmissions will be the right choice for urban consumers, where traffic is often characterized by traffic jams.

Leave a Reply

Your email address will not be published. Required fields are marked *